Arrow-storage-products 697.68222 Bedienungsanleitung

Model No.697.68222yeafT] L !•/ ^ ^..•,v,. •;. .^... • , ;^_iARROWWorld’s Leading Maker of Storage Buildings®715500109BUILDING DIMENSIONS * Size ro

Anchoring Down The Buildingit is important that the entire floor frame be anchored after the building is erected.Below are recommended ways of anchori

Remove from bag of screws and save for the last stepTTT65103#8-32 Hex Nut (236)65900A#10Bx1/2"(13mm) Black Screw (8) (Packed with Screws)65923#8-

Assembly Key No.PartNumberPartDescriptionQuantity In CartonCheckList13719 Door Handle Brace229373 Front Wall Panel236514Corner Panel446108 Large Right

13

Step 1• Parts Needed For • Floor Frame Assemblies#8934 Ramp(1)• 9367 Front Floor Frame (2)• 8936 Rear Floor Frame (2)• 10392 Side Floor Frame (4)Th

Step 2• Parts Needed For • Frame Assemblies5986 Rear Wall Angle (2)10389 Rear Wall Channel (2)10390 Side Wall Channel (4) 10394 Side Wall Angle

Step 3• Parts Needed For •• 10397 Roof Beam (8)Roof Beam AssembliesSV16The roof beams join the two gables and support the roof panels. The mainr

Step 4• Parts Needed For •• 6403 Door Track Splice (1)Door Track Assembly• 9366 Door Track (2)A17The door track assembly supports the sliding door

Step 5Parts Needed ForFloor Framei Front Floor Assembly (1) i Side Floor Assembly (2)' Rear Floor Assembly (1)1 Place the floor frame pieces

Step 6Parts Needed For Corners6515 Wall Panel (2)9373 Front Wall Panel (2) 6514 Corner Panel (4)NOTEThe remainder of the building assembly requires ma

Owner's ManualBefore beginning construction, check local building codes regarding footings, location and other requirements. Study and u

Step 7Parts Needed ForTop FramesI Door Track Assembly (1)I Rear Wall Angle Assembly (1) I Side Wall Angle Assembly (2)The top frame pieces give r

Step 8• Parts Needed For •• Rear Wall Channel Assembly (1)Mid Frames• Side Wall Channel Assembly (2)WP21The mid frame pieces give rigidity tothe side

Step 9• Parts Needed For • Wall Panels• 6515 Wall Panel (8)SR22Each wall panel has a crimped rib on one side. The crimped rib should gounder the rib o

Step 10• Parts Needed For • Front Channel/Door Jamb19369 Door Jamb (2)I 9365 Front Wall Channel (2)The door jambs reinforce the door opening and

Step 11• Parts Needed For t Gable Assemblies>6108 Large Right Gable (2)• 6109 Large Left Gable (2)• 6114 Small Right Gable (2)• 6115 Small Left

Step 12• Parts Needed For • Gables/Roof Beams• Left Gable Assemblies (2)• Right Gable Assemblies (2)• Single Roof Beam Assemblies (2)• 6636 Ga

Step 13• Parts Needed For •• Main Roof Beam Assembly (1)Roof Beam/Braces• 6227 Roof Beam Brace (2)WP261 Fasten the track supports to thefront gable a

Step 14• Parts Needed For •Right Roof Panel• 10510 Right Roof Panel (1)WP27Installing the roof panels is best done with a step ladder. Install the fir

Step 15• Parts Needed For • Ridge Caps & Panels10511 Left Roof Panel (1) '6538 Roof Panel (2)' 6869 Ridge Cap (3)1 Install a left ro

Step 16• Parts Needed For •• 6538 Roof Panel (2)Ridge Caps & Panels• 6868 Ridge Cap (3)WP291 Install the second ridge caps 6868overlapping the f

Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a win

Step 17• Parts Needed For • Ridge Caps & Panels'6538 Roof Panel (2)' 6869 Ridge Cap (3)' 10510 Right Roof Panel (1) ' 105

Step 18• Parts Needed For •• 6014 Side RoofTrim (2)RoofTrim• 6015 Side Roof Trim (4)WP311 Attach the side roof trim to thelower end of the roof panels

Step 19Parts Needed For ^ Door Assembly13719 Door Handle Brace (2)110475 Right and Left Doors (2)110497 Horizontal Door Brace (4) 16278 Vertical D

Step 20• Parts Needed For •Door Installation & AdjustmentI Right Door Assembly (1) I Left Door Assembly (1)SQ331 From inside the building,

SOME FACTS ABOUT RUST Rusting is a natural oxidizing process that occurs when bare metal is exposed to moisture. Problem areas inclu

Safety precautions are important to follow throughout the construction of your building.*Care must be taken when handling various pieces of yo

CARE & MAINTENANCE...Finish: For long lasting finish, periodically clean and wax the exterior surface. Touch- up scratches as soon

ACCESSORIES...ROOF STRENGTHENING (heavy snow load) KITSExtra roof beams and gable braces designed for added protection against heavy snow accumulatio

THISPAGEWASLEFTBLANKINTENTIONALLY

THISPAGEWASLEFTBLANKINTENTIONALLY

The Foundation For Your BuildingOPTION 1: ARROW FLOOR FRAME KIT: (Order No. FB1014-A or 68387-A)Arrow has the best base for your building in this simp